CURRICULUM VITAE


CURRICULUM VITAE

PERSONAL DATA
Data Pribadi

Name : Raldi Artono Koestoer
Nama
Place/date of birth : Jakarta, September 21st, 1954
Tempat/tanggal lahir

Personal Address : Jl. Kahfi 2 Gg Bekmisar no 35 F
Alamat Rumah Jakarta 12630 – Indonesia
Phone : 6221-75905804
Telpon

NIP : 130 794 139
Function : Lecturer in Mechanical Eng. Dept
Pekerjaan Faculty of Engineering
University of Indonesia
Professional Address
Alamat kantor Dept. Teknik Mesin Fak. Teknik Univ. Indonesia
Kampus UI, Depok – Jawa Barat, Indonesia
Phone : 6221-7270032; 6221-7864089 ext. 215
Fax. : 6221-7270033
Mobile :+62 8161992186

E-mail Address
koestoer@eng.ui.ac.id
Homepage http://staff.eng.ui.ac.id/raldiartono.m
http://koestoer.blogspot.com/

https://koestoer.wordpress.com/
Status
Married – having 2 children

EDUCATION
Pendidikan

2006 (June 1) Professor in Heat transfer in Fac. of Engineering Univ of indonesia
Guru Besar dalam bid Perpindahan Kalor FTUI

1981 –1985 Docteur-Ingeniueur in Heat Transfer at Universite de Paris XII Val de Marne, FRANCE on 28th Jan 1985.
Docteur-Ingeniueur dalam bidang Perpindahan Kalor dari Universite de Paris XII Val de Marne, FRANCE Thesis dipertahankan pada tanggal 28 Januari 1985.

1980 –1981
Ecole Nationale Superieure de Mecanique et Aeronautique – ENSMA, special course, at Poitiers – France.

1973 –1978
Graduated from Mechanical Engineering Dept. Univ. of Indonesia, Faculty of Engineering, Jakarta, INDONESIA, December 1978.
Lulus sebagai Insinyur dari Jurusan Teknik Mesin Fakultas Tenik Universitas Indonesia, Desember 1978.

1970-1972 SMAN III Teladan Jakarta
1967-1969 SMPN I Jakarta
1960-1966 SD Neg HOS Cokroaminoto Jakarta

TRAININGS AND WORKSHOP
Pelatihan
2003 Training for Reviewer of Technological And Professional Skills Development Sector Project (TPSDP), ADB loan no. 1792 INO Batch III. Directorate General of Higher Education, Ministry of National Education, Hotel Bidakara Jakarta 13th –15th June, 2003.
2002 Training for the trainers on Information Technology. Included Prog Logic & Technique, C++, Java, UML and others at NIIT Jakarta. 18th July to 09th August 2002
2 weeks training on Resource Allocation Models of Higher Education at the Center of Higher Education Programs (CHEPS) – University of Twente – Enschede Netherland ( 10th to 20th June 2002)
Participation in the Distance Education Course for Eastern Asian Universities on ‘The Management of University-Industry Partnerships’, 2nd April to 5th July 2002, organized by ESMU-UNESCO.
1999 Professional Training for Higher Education Teaching Staff and Trainers, organized by University of New Castle Upon Tyne – UK, held on February 14th – 19th, 1999 at Cipanas – West Java.
Intensive Study of Islamic Philosophy 8th – 10th January 1999, Center of Middle East and Islamic Study, Univ. of Indonesia
1998 Leadership Workshop organized by University of Indonesia on 16th – 17th March 1998
1997 Teaching Improvement Workshop, a part of EEDP (Engineering Education Development Program), Training for the trainers, include method of teaching and learning, Curriculum Development, ABET consideration, Active learning, organized by Directorate General of Higher Education, Ministry of Education of Republic Indonesia
1995 Workshops/short course on Energy Conservation Technology in Industrial Steam Boilers, organized by The Association for Overseas Technical Scholarship Japan and implemented by The Energy Conservation Center Japan in cooperation with Ministry of Mines and Energy, Jakarta 6th-10th November 1995
1993 Training/short course on Corporate Planning organized by PT. Strategindo Forumjaya in association with Strategic Forum Expertise Sdn Bhd., Jakarta December 15th – 16th 1993
1990 Training on Macro Economic and Economic Development, Jakarta February 19th – March 5th 1990, organized by Faculty. Of Engineering Univ. of Indonesia.
1989 Applied Approach Training for Teaching and Learning, organized by Univ. of Indonesia – Jakarta 20th February – March 11th , 1989, Education Purpose.
1988 70 hours training on Academic Administration, organized by Ministry of Education and Culture, Jakarta March 7th – 21st, 1988.
1982 Job training on Two phase flow experimental in Centre d’Etude Nuclaire de Grenoble – France, 2 (two) months, December 1982.

LANGUAGES PROFICIENCIES
1. English (active)
2. French (active)

PATENT PENDING
Petty patent pending, INFANT INCUBATOR, appl no. S-00200600022
2 February 2006.

PROFESSIONAL ACTIVITIES
1. Member of Higher Education Board, Engineering Science Commission, Ministry of National Education (Dewan Pendidikan Tinggi, Bidang Ilmu Teknik), 1999 to 2001.
2. Reviewer of Jurnal Teknologi 16th year edition 2002. A journal published by Faculty of Engineering Univ. of Indonesia.
3. Reviewer of Jurnal Teknologi no. 2 15th year edition, June 2001. A journal published by Faculty of Engineering Univ. of Indonesia.
4. Reviewer, in the selection process of Higher Education Project Research Award Program (Starter Grant and Matching Grant) for the Academic Year 1999/2000. DGHE, Ministry of Education and Culture, ADB loan No 1253 – INO
5. Chairman of Indonesian Heat Transfer Society (Himpunan Ahli Perpindahan Kalor Indonesia), 1994 – 2000.
6. Member of P4T (Center of the Development of Research in Higher Education) University of Indonesia, 1999.
7. Member of Board of Assessors Indonesian Institute of Engineers (Mechanical branch) June 14th 1996 – 1999.
8. Member of Majelis Penelitian Perguruan Tinggi (University Research Board), Directorate General of Higher Education, Ministry of Education and Culture, 1994 -1997.
9. Member of Board of Reviewer, Professional Engineer Accreditation, Indonesian Institute of Engineer (PII), Mechanical Branch, 1996.
10. Member of Board of Reviewer on Research Project ‘Competitive Grant’ (Hibah Bersaing) – Directorate General of Higher Education, Ministry of Education and Culture.
11. Member of EEDP project (Engineering Education Development Program) – Directorate General of Higher Education, Ministry of Education and Culture.

JURY OF PhD DISSERTATION
1. Member of the jury for PhD dissertation of candidate Nazaruddin Sinaga at ITB (Bandung Institute of Technology) 28th August 2004.
2. Member of the jury for PhD dissertation of candidate Bambang Suryawan at UI (University of Indonesia) 26 Feb 2004
3. Member of the jury for PhD dissertation of candidate Berkah Fadjar at ITB (Bandung Institute of Technology) 29th June 2002, ‘These de Doctorat en Co-tutelle’ (a joint program between ITB – Indonesia and Universite de Valenciennes et du Hainaut – Cambresis – France).
4. Member of the jury for PhD dissertation of candidates Made Kartika Dhiputera and Budihardjo at Faculty of Engineering Univ. of Indonesia.
5. Member of the jury for PhD dissertation of candidate Syukri Himran at ITB (Bandung Institute of Technology) July 1994.
6. Member of the jury for PhD dissertation of candidates Arifuddin Resang and John Manga at University of Hasanudin, Ujung Pandang, 1988,

RESEARCH (field) of INTEREST
1. Experimental research in heat transfer.
2. Development of Energy Alternative and energy policy and strategy
3. Apropriate technology for people’s purpose
4. Heat Exchanger, Tubular, Plate and multi-layer.
5. Boiling and Condensation Research.
6. Education, active learning, curriculum development.
7. History, Islamic History.

RESEARCH EXPERIENCES
1. Team on Incubator research development project, for student practice lab, with student of Mechanical Eng. Faculty of Engineering, University of Indonesia, since 1999.
2. Research Associate Program, Universitat der Bundeshwehr, Institut fur Thermodynamic, 1,5 months August – September 1996.
3. Research Associate Program, Technische Universitat Chemnitz-Zwickau, Germany, 1,5 months July – August1996
4. Team leader on Bajaj langit biru (Bajaj without pollution) research and development project, with student of Mechanical Eng. – Faculty of Engineering, University of Indonesia, 1996.
5. Team on Hoover craft research and development project, with student of Mechanical Eng, Faculty of Engineering, University of Indonesia 1995.
6. Team Leader on Thermal Boundary Layer Research, Sponsored by Toray Science Foundation (JAPAN), 1989 – 1990.
7. Head of Research Team, Using Data Acquisition to improve the performance of Cooling Tower, World Bank Project IX, 1988 – 1989.
8. Research in Heat Transfer for preparation of PhD Dissertation at the University of Paris Val de Marne – France, October 1981 – January 1985

AWARDS
1. 3rd winner of “ Lomba Rancang Bangun Teknologi BPPT 2001”, dalam rangka Hari Kebangkitan Teknologi Nasional ke VI tanggal 10 Agustus 2001. Subject “ Rancang Bangun Inkubator Tetas Ayam, prix attributed for Lukito, Raldi A Koestoer, Lutfi, on 30th October 2001.
2. Runner up of Best lecturer at the University of Indonesia (1995).
3. Award from Faculty of Engineering Univ. of Indonesia for appreciating the achievement as Second winner of University Research on science and Technology 1990-1991, March 22nd, 1991.
4. First winner, as the best researcher in the year 1988 in Science and Technology of the University of Indonesia, with the title “A study of thermal field of a Zero method heat flux sensor by electrical analogy”. Attributed on February 11th, 1989, Jakarta.
5. Second winner, best research in University in the year 1990, Title of the publication “Thermal boundary layer on the annular space of the concentric tube”, attributed on February 2nd 1991.
6. Third winner, Research Competition 1989 in University of Indonesia, Title of the publication “Experimental Research on Heat and Mass Transfer to Improve the efficiency and performance of Cooling Tower Using Data Acquisition Systems”, attributed on February 3rd 1990

JOB POSITION IN MANAGEMENT AND ADMINISTRATION
1. Assistant Deputy at State Minister of Research and Technology, (Development of Research Science and Technology, Engineering Science Section), February 2004 – January 2006
2. Deputy Dean for Academic Affair of the Faculty of Engineering University of Indonesia, April 2000 to Sept 2001.
3. Head of Heat Transfer Laboratory, 1994 – 2003.
4. Head of Post Graduate Study in Mechanical Engineering, Faculty of Engineering University of Indonesia, 1993 – 1996.
5. Head of Sub department Energy Conversion and Heat Transfer in Mechanical Dept. Faculty of Engineering University of Indonesia, 1990 – 1994.
6. General Secretary of the Mechanical Dept Faculty of Engineering Univ. of Indonesia, 1986 to 1989.

PROJECT COORDINATOR
1. Deputy Director, Research Grant Program joint research cooperation between FTUI-PERTAMINA (Indonesian State-owned Oil Company), five years cooperation, 1991 – 1996.
2. Project Engineering Design Practice Manual, Project of Indonesia State Oil Company, as a head of heat Exchanger team, 1995. Product: Design Practice of Heat Exchanger.
3. Project Coordinator, SISTEK II, project of Indonesian State-owned Oil Company Pertamina., 1994.
4. Project Coordinator for ARCO Pagerungan, 1994.
5. Project Coordinator, SISTEK I, project of Indonesian State-owned Oil Company, Pertamina 1993.

LECTURES
1. Final Project Supervisor of the student undergraduate and post graduate at Mechanical Department Faculty of Engineering Univ. of Indonesia 1985 up to now
2. Thesis Supervisor of Post Graduate Program on Mechanical Department Faculty of Engineering Univ. of Indonesia 1994 up to now
3. Lecturer of Heat Transfer Subject in Mechanical Department, Faculty ff Engineering Univ. of Indonesia Since 1985 up to 2004. ( 5th semester at regular program).
4. Lecturer of Engineering Measurement Subject in Mechanical Department, Since 1990-2001.
5. Lecturer of Engineering Measurement Subject in Mechanical Department, 2001 at the Faculty of Engineering, Univ. of Indonesia (an International Program in cooperation with the Queensland Univ. of Technology – Australia, course conducted in English).
6. Lecturer of Boiling and Condensation Subject in Post Graduate Program on Mechanical Department Faculty of Engineering Univ. of Indonesia ,September 1st – December 21st 1997.
7. Lecturer of Special Topics (Capita Selecta) Subject in Mechanical Department Faculty of Engineering Univ. of Indonesia, 1995 (extension program).

TRAINING AND SHORT COURSES ORGANIZER
1. Head of organizing and Steering Committee of Heat Exchanger Course, held by Indonesian Heat Transfer Society – HAPKI in Cooperation with HTFS (Heat Transfer and Fluid Flow Service – UK), 1997.
2. Head of the Heat Exchanger Course, held by HAPKI (Indonesian Heat Transfer Society) – in Cooperation with HTFS (Heat Transfer and Fluid Flow Service – UK), December 4th-7th, 1995
3. Head of the Plumbing System Course, 40 hours – a regular course organized by P2M on 25th February – 2nd March 1991
4. Head of organizing Committee of the Plumbing System Course, 40 hours – a regular course organized by P2M, 15th – 20th October 1990
5. Course of Basic Air Conditioning Design a Joint Cooperation between Dept. of Mechanical Engineering Univ. of Indonesia and Carrier Distributor,
6. Course of Plumbing a Joint Cooperation between Dept. of Mechanical Engineering Univ. of Indonesia and Ryowa Bimatek Pratama.

SEMINAR ORGANIZER
1. Head of the Organizing Committee of Seminar HAPKI II 1996
2. Head of the Organizing Committee of Seminar HAPKI I 1995.
3. Heat Exchanger Symposium, Indonesian Heat Transfer Society, April 1995.
4. Head of the Organizing Committee of Seminar MESIKOM’90, Mechanical Engineering Experimental & Computer
5. Head of the Organizing Committee of Seminar MESIKOM’89 at Faculty of Engineering, Univ. of Indonesia, Depok, July 1989,
6. Seminar and Workshop on Energy, October 20th – 21st , 1989
7. Head of the Organizing Committee of Seminar MESIKOM’88, Mechanical Engineering Experimental & Computer.
8. Head of the Organizing Committee of Seminar, TEMISI’87, Mechanical Engineering and Instrumentation.

SPEAKER AND/OR MODERATOR AT THE SEMINARS
1. Speaker and moderator in the 4th FTEC 2003 (Fluid and Thermal Energy Conversion) International Symposium on Transport Phenomena), Sanur Bali – Indonesia, 7th –11th December 2003.
2. Speaker and moderator in the ISTP-14 (International Symposium on Transport Phenomena), Under the auspice of The Pacific Center of Thermal Fluids Engineering (PCTFE), USA., Sanur Bali – Indonesia, 6th –9th July 2003.
3. Speaker in one day seminar on energy conversion held by Mechanical Dept Faculty of Engineering, University of Tarumanagara, Jakarta 24th October 2002.
4. Speaker in one day seminar on Writing of Engineering Textbook for Higher Education. Seminar held by Universitas Bina Nusantara, Jakarta 24th October 2001.
5. Speaker in Regional Symposium on Chemical Engineering – RSCE, sponsored by JICA-Japan, in Conjunction with Seminar Teknik Kimia Soehadi Reksowardojo, organized by Chemical Engineering Dept Faculty of Industrial Technology, Bandung Institute of Technology (ITB), Oct 29th – 31st, 2001
6. Participant and speaker of the Workshop on Academic Organization, Univ. of Indonesia, July 18th 2001.
7. Speaker in one day seminar on Refrigeration and Air Conditioning Technology held by Community Services (P2M) dan Center of Refrigeration and Air Conditioning study (CRACS/Pakartu) Mechanical Eng Dept Faculty of Engineering Univ. of Indonesia, Jakarta 13th Juni 2000.
8. Speaker for Ceramah Ramadhan; subject : Islam dan Iptek, held by Mechanical Dep. Faculty of Engineering, Univ. Indonesia. Depok 17th December 1999.
9. Speaker in the Science Seminar Mechanical Eng Dept Faculty of Engineering Univ. of Indonesia with the title “Building an Accountability System”, July 30th, 1999.
10. Speaker in one day Workshop of Industrial Flow Simulation, organized by Fluid Dynamics Analysis Research Group Faculty of Engineering, Univ. of Indonesia, Depok November 18th 1997
11. Moderator in the Seminar on Utilization of Compressed Natural Gas (CNG) as an Environmentally Friendly Fuel for Automotive, organized by P2M in cooperation with Center for Energy Study Univ. of Indonesia and NPO – ASEAN -New Zealand NGUT Project – ASCNER, Jakarta October 30th 1997
12. Speaker and moderator in National Seminar on Chemical Engineering – Heat and Mass Transfer as a Basic Engineering Process, organized by Chemical Engineering Department Faculty of Engineering, Univ. of Gajah Mada, Jogjakarta July 1st – 2nd 1997
13. Speaker in Engineering in Indonesia – Between University and Industry, organized by ITB (Bandung Institute of Technology) and DAAD (German Academic Exchange Service), Bandung March 14th – 16th 1997
14. Speaker in 9th National Seminar on Industrial Engineering – Improvement of the relevancy of Higher Education on Technology and Human Resources Quality facing on 21st century, organized by Faculty of Industrial Engineering ITS (Surabaya Institute of Technology), Surabaya February 27th – 28th 1997
15. Moderator at the national seminar on Challenges and Opportunity toward 21st century, organized by University Pancasila, Jakarta, June 21st-22nd 1996
16. Speaker in the Efficiency of Engineering Design in Pressure Vessel an Heat Exchanger Seminar, organized by BPIS , Surabaya May 22nd 1996.
17. Moderator at the seminar on Aircrafts Industry and strategies of IPTN to anticipate future market of Aeronautic. organized Science section of Engineering Student Faculty of Engineering Univ. of Indonesia Depok March 13th 1996.
18. Speaker in the Computer in Engineering, The 15th Annual International Computer in Engineering Conference, The 9th Annual ASME Engineering Database Symposium, Sept 17-20, Boston, Massachusetts, 1995.
19. Speaker in Regional Symposium on Chemical Engineering, sponsored by JICA-Japan, 9-11 Oct 1995, Chulalangkorn University Bangkok Thailand.
20. Many conferences and seminars in ASEAN countries and others; Singapore (1993), Brunei Darussalam, Malaysia 1996 (as described and mentioned in papers presented).
21. Speaker in Fluid and Thermal Energy Conversion (FTEC) 94, International Conference, December 12th – 15th, 1994, Kuta Denpasar–Bali – Indonesia. Organized by Thermodynamics Research Lab, Inter University Center for Engineering Sciences, Bandung Institute of Technology – Indonesia.
22. Speaker in 12th Conference of ASEAN Federation of Engineering Organizations (CAFEO 12), 28th – 30th November 1994, Bandar Seri Begawan, Brunei Darussalam.
23. Speaker in the seminar Analyze and Application of Heat and Mass Transfer facing the Industrial Era, Organized by Inter University Center on Heat and Mass Transfer Univ. of Gadjah Mada, Jogyakarta February 25th – 26th 1992.
24. Speaker in Inter University Center on Heat and Mass Transfer 1991, at Gadjah Mada Univ., Jogyakarta.
25. Speaker in the seminar The Influence of Heat and Mass Transfer on Design and Analyzing of system and Industrial Equipment, Organized by Inter University Center on Heat and Mass Transfer Univ. of Gadjah Mada, Jogyakarta December18th – 19th 1990.
26. Speaker in the seminar on Application of Thermodynamics Analyzing on Thermal and Processing System, Organized by Inter University Center on Engineering Science, Bandung Institute of Technology, Bandung February 6th – 8th1989
27. Speaker and Moderator in the Seminar “ Penelitian Experimental untuk meningkatkan efisiensi dan kinerja menara pendingin dengan menggunakan system data otomatik, Organized by Research Institute Univ. of Indonesia, Depok August 9th 1989.
28. Speaker in PIRUSA’1989, International Conference on Computer Aided Engineering, organized by CADLAB Computer Science Center University of Indonesia, Jakarta June 5th – 8th 1989.
29. Speaker in the Heat and Mass Transfer seminar , Organized by Inter University Center on Engineering Science Univ. of Gadjah Mada, Jogyakarta October 18th – 19th 1988.
30. Speaker in the Heat Transfer seminar, Organized by Inter University Center on Engineering Science Univ. of Gadjah Mada, Jogyakarta February 25th – 26th 1987.
31. Speaker in National Congress of Sciences (KIPNAS IV – 1986), organized by LIPI – Indonesian Institute of Science, Jakarta September 8th – 12th 1986.
32. Speaker in the National Science Seminar “ Peranan IPTEK dalam pembangunan industi untuk mempersiapkan industri tinggal landas, Organized by Faculty of Industrial Engineering, Sepuluh November Institute of Technology, Surabaya January 7th – 8th 1986.

INSTRUCTOR AND FASILITATOR OF TRAINING AND COURSES
1. Instructor of Training Teaching Improvement Workshop at opening and overview program, At ITI Institut Teknologi Indonesia, Feb 2006. Serpong.
2. Instructor of SQIP (school quality improvement program) – a high school’s teachers improvement program, funding by Sampoerna Foundation, 2005.
3. Heat Exchanger Course Organized by P2M Mechanical Engineering Faculty of Engineering Univ. of Indonesia, Jakarta, Indonesia 3 days 15th – 18th September 2003.
4. Design and Maintenance of Boiling system short course organized by P2M (Community Services) Mechanical Dept. Faculty of Engineering Univ. of Indonesia on 16th – 18th October 2001
5. Instructor for Workshop/short course on Design and Maintenance of Boiler. Organized by P2M Mechanical Engineering Faculty of Engineering Univ. of Indonesia, Jakarta, Indonesia 3 days 21st – 23rd May 2001.
6. Instructor and Facilitator for First Short Teaching Improvement Workshop, as an Expert committee and instructor, held at Faculty of Eng Univ. of Indonesia, Depok, Indonesia 31st January – 2nd February 2001.
7. Instructor and Facilitator for Teaching Improvement Workshop held by Faculty of Industrial Technology of Bandung Institute of Technology, February – March 2000.
8. Instructor and Facilitator for Socialization of Teaching Improvement Workshop and Curriculum Evaluation, Institute Technology of Indonesia (ITI), Chemical Engineering Dept Faculty of Industrial Technology, 2000.
9. Instructor for Operating and Maintenance of Air conditioning system short course organized by Mechanical Dept. Faculty of Engineering Univ. of Indonesia :
10. 13 – 17 October 2003 11. Mechanical Refrigeration
12. 20 – 24 November 2000 13. Mechanical Refrigeration
14. 25 – 29 October 1999 15. Mechanical Refrigeration
16. 5 – 9 July 1999 17. Mechanical Refrigeration
18. 26- 30 October 1998 19. Mechanical Refrigeration
20. 3 – 7 November 1997 21. Mechanical Refrigeration
22. 21 – 25 April 1997 23. Mechanical Refrigeration
24. Teaching Improvement Workshop, as a facilitator in Teaching Learning, Quality for Higher Education and Quantum Learning session, session, in 3 days , Three weeks full training for lecturer of the Engineering School, organized by Directorate General for Higher Education, held at Faculty of Engineering University of Andalas, Padang, Indonesia, 01st-20th Nov 1999
25. Teaching Improvement Workshop Batch 4, as a facilitator in Teaching Learning, Quality for Higher Education and Quantum Learning session, in 3 days, 3 weeks course for lecturer in Engineering Faculty, organized by Directorate General for Higher Education, held at Faculty of Engineering, Gadjah Mada University, Yogyakarta on October 11th-30th, 1999.
26. Basic Air Condition System Design, short course 60 hours organized by Mechanical Department Faculty of Engineering , Univ. of Indonesia in Cooperation with CARRIER.
27. 2nd – 13th July 2003 28. : – Mechanical Refrigeration
29. 29th October – 9th November 2001 30. : – Mechanical Refrigeration
31. 12th – 23rd July 1999 32. : – Mechanical Refrigeration
33. 2nd – 13th November 1998 34. : – Mechanical Refrigeration
35. 2nd – 13th June 1997 36. : – Mechanical Refrigeration
37. 31st August –11th September 1992 38. : – Mechanical Refrigeration
39. – Cooling Tower
40. 10th – 20th February 1992 41. : – Mechanical Refrigeration
42. 26th August – 5th September 1991 43. : – Mechanical Refrigeration
44. 4th – 15th February 1991 45. : – Mechanical Refrigeration
46. 20th – 30th August 1990 47. : – Mechanical Refrigeration
48. – Cooling Tower
49. 6th – 18th November 1989 50. : – Mechanical Refrigeration
51. 6th – 18th March 1989 52. : – Mechanical Refrigeration
53. Heat Rejected Equipment
54. – Cooling Tower
55. 21st Sept – 19th October 1987 56. : – Mechanical Refrigeration
57. Instructor of Short Course of Thermal Design of Heat Exchanger, held by Heat Transfer Laboratory Mechanical Eng Dept Faculty of Engineering Univ. of Indonesia, June 15th 16th 1999.
58. Teaching Improvement Workshop, as a facilitator in Teaching Learning, Quality for Higher Education and Quantum Learning session, in 3 days, 3 weeks course for lecturer in Engineering Faculty, organized by Directorate General for Higher Education, held at Bandung Institute of Technology – ITB, February – March 1999.
59. Instructor of Heat Exchanger Course Program, short course organized by Indonesian Heat Transfer Society (HAPKI) and Heat Transfer and Fluid Flow Services (HTFS – United Kingdom), Jakarta 17th – 19th November 1997
60. Instructor of Heat Transfer Review on Heat Exchanger Course Program, short course organized by Indonesian Heat Transfer Society and Heat Transfer and Fluid Flow Services – United Kingdom, 9th – 12th December 1996.
61. Improvement of Ability in Engineering Design of Pressure Vessel and Heat Exchanger, BPIS, Indonesian Strategic Industry, May 22nd 1996. PT Barata Indonesia, Surabaya.
62. Instructor of Heat Transfer Review on Heat Exchanger Course Program, short course organized by Indonesian Heat Transfer Society and Heat Transfer and Fluid Flow Services – United Kingdom, Jakarta 4th – 7th December 1995. :
63. Combustion Engineering, Course in Mechanical Dept, Faculty of Engineering Univ. of Indonesia 1991.

RELIGIOUSE ACTIVITIES
1. Pilgrimage to Mecca/Medina (al Umra) – Cairo, Egypt, May 2003
2. Pilgrimage to Mecca/Medina (al Umra) – Ramadhan 1996
3. Pilgrimage to Mecca/Medina (al Umra) – Amman Jordan, Jerusalem, 1995
4. Pilgrimage to Mecca/Medina and Arafah/Mina (al Haj) – 1994
5. Pilgrimage to Mecca/Medina and Arafah/Mina (al Haj) – 1992

VISITS
1 Visit to Netherland, Univ. of Twente, Delft Inst of Technology, June 2002, 10 days workshop on Resource Allocation Models organized by CHEPS.
2 Visit to Manila, Philippines, 2 weeks at De La Salle University., June 2001, ASEAN University Network (AUN) program, exchange of professor.
3 Visit to USA December 1997, Comparison study of Engineering Education, EEDP project, DGHE. Univ. of Minnesota, Univ. of Wisconsin.
4 Visit to Universitat der Chemnitz-Zwickau and Universitat der Bundeswehr Hamburg Germany, 1996. Research Associate, learning in practical Laser Doppler Velocimeter.
5 Visit to Aachen, Bochum – Germany, 1995, Cooperation in gas conversion.
6 Visit to IRC-Lyon, ENSMA Poitiers France, 1995, Cooperation in gas conversion.
7 Visit to AEA Technology Harwell, UMIST. Leeds University-UK 1995. Visit of Laboratory.
8 Visit to Nanyang Institute of Technology, National University of Singapore, 1987 and 1993. Visit of Laboratory and Education system.
9 Visit to University Technology Malaysia, Univ. Kebangsaan Malaysia, USM (Penang), Malacca. In relation with gas conversion research.
10 Visit to Univ. of New South Wales, Univ. of Sydney, CSIRO, Griffith Univ. Brisbane, Australia. Cooperation in gas conversion.
11 Visit to Univ. of Manitoba, Univ. of Alberta, Canada. Cooperation in gas conversion.
12 Visit to Univ. of Minnesota, Univ. of Pittsburgh, Massachusetts Institute of Technology – USA. Cooperation in gas conversion.
13 Visit to Oxford, Leeds, Imperial College, Manchester UMIST, Salford. Harwell HTFS, Marathon Oil, AMEC Engineering, United Kingdom. Cooperation in gas conversion.
14 Visit to Tokyo Inst. of Technology, JAPEC, Tokyo. Cooperation in gas conversion.
15 Visit to Institute of Engineers, Brunei Darussalam. CAFEO Conference.

SOCIAL ACTIVITIES
1. Initiation of Reiki G Tumo 1, organized by Waskita Reiki Foundation, Jakarta September 16th 2000
2. Secretary of Board of Trustee of the Babuut Taubah Mosque at Kemang Pratama Residential – Bekasi 1992-1996.
3. Vice Chairman of Board of Trustee of the Babuut Taubah Mosque at Kemang Pratama Residential – Bekasi 1996-2000.
4. Founder of Babuut Taubah Foundation – Kemang Pratama 1994.

HOBBY
Music, Guitarist classical and solo.
Member of the Professor’s Band, Guitar/flute player and singer, Composer a song.

FAMILY
Name Member Place & Date of Birth
Harlina Spouse Jakarta, 11 October 1956
Wahyu Perdhana Son St. Denis – France, 08 April 1983
Lulu Safira Daughter Bekasi, 03 February 1998

REALISATION OF COOPERATION
1. FTUI-Universitas Teknologi Malaysia
Scholarship for FTUI’s Staff, first batch begin Aug’92
Person Contacted : – Prof. Arbaeyah Yahya
– Prof. Zainal Aripin Zakariah
2. Between Institution (FTUI-PERTAMINA)
Gas conversion Research, Five years planning, signed 1991
3. Local Industrial Partner for Mechanical .Engineering Department :
 PT Kodja (Ir. Otto Uylan), Research & Design of Cooling Tower
 PT Bukaka Teknik Utama, Ir.Achmad Kalla, Development of Design System for Construction equipment, 1991
4. International Cooperation
 FTUI-Tokyo Institute of Technology (Japan)
Person Contacted : Prof. Hiroo Niiyama
from Int. Corp. Tokyo Institute of Technology, Development of Methane Coupling Laboratory
 FTUI-University of New South Wales (Australia)
Research and Post Graduate Program (being done)
Person Contacted : Prof. Trimm
 FTUI-University of Manitoba (Canada)
Research & Post Graduate
Person Contacted : Prof. Gesser & Prof. Hunter

References for Dr. Raldi A. Koestoer

1. Prof. Dr. Ing. W. Roetzel
Universitat der Bundeswehr
Hamburg – Germany
Tel 040-65412219 Fax 040-65412792

2. Prof. Dr. Andrew C. McIntosh
University of Leeds
Leeds LS2 9JT – United Kingdom
Tel 0532 431751 Fax 0532 440572
Email: A.C.McIntosh@leeds.ac.uk

3. Vishwas Wadekar Dr
HTFS-UK (Heat Transfer and Fluid Flow Service)
392,7, Harwell, Didcot, Oxfordshire, 0X11 ORA
United Kingdom
Tel 44 235 432346 Fax 44 235 831981
Email: Vishwas.Wadekar@aspentech.com

4. M. Idrus Alhamid Dr (mamak@indo.net.id; 0811953617)
Department of Mechanical Engineering University of Indonesia

LIST OF PUBLICATIONS of DR. Ing. Raldi Artono Koestoer

BOOKS
1. Fenomena Pendidihan 2003, ISBN 979-98826-3-x, Penerbit DTM.
2. Perpindahan Kalor untuk Mahasiswa Teknik (Heat Transfer for Engineering Student), 2002 – ISBN 979-9549-20-5, publisher: Salemba Teknika.
3. Penyelesaian Soal Perpindahan Kalor (Solution for Heat Transfer Problem), Vol – 1, 1999.
4. Pengukuran Teknik 60 Soal dan Jawab (Engineering Measurement 60 problems and solution), 2000. ISBN 979-8427-04-X, publisher: Andy Offset – Ygyakarta.
5. Konduktivitas Kalor Zat Padat, Cair dan Gas (Thermal Conductivity of Solid, Liquid and Gas), 1998. ISBN not available.
6. Coal and its prospect in Indonesia, 1997. ISBN 979-8427-04-1.
7. Perpindahan Kalor Konveksi, (Convective Heat Transfer), 1999. ISBN 979-8427-08-4, publisher: Sagung Seto, Jakarta.
8. Kondenser Untuk PLTU (Condenser for Power Plant), 1997. ISBN 979-8427-05-X.
9. Perpindahan Kalor Radiasi (Radiative Heat Transfer), 1997. ISBN 979-8427-07-6.
10. Studi Praktis Kebijaksanaan Migas Berdasarkan Studi dan Penelitian (Practical Study of Oil and Gas Policies based on Research), 1996.
11. Aliran Dua Fase dan Fluks Kalor Kritis (Two Phase Flow and Critical Heat Flux), 1993, publisher: Pradnyaparamita, Jakarta.
12. Bahasa Komputer Pascal (Pascal Computer Language), 1986, publisher: Ganesha Exact Bandung.

PAPERS

1. Raldi A. Koestoer, Didit P. Budi, Pengembangan sistem pemanasan kompartemen ayam broiler (DOC) menggunakan burner berisolasi, Prosiding Seminar Nasional Tahunan Teknik Mesin IV (SNTTM) – 2005, Jurusan Teknik Mesin – Universitas Udayana, Bali, 21 – 22 Nopember 2005, ISBN 979-97158-0-6 .
2. Raldi Artono Koestoer, Didit Prasetyo Budi, Development of heating system for the chicken’s compartment using insulated burner, ProceedingThe 8th International Conference On Quality in Research (QIR) Depok, 9-10 Agustus 2005 ISSN 1411 1284.
3. Raldi Artono Koestoer, Mohammad Faradhy, Analisis kinerja pendinginan dan pemanasan delta box berbasis elemen peltier sebagai pompa kalor, Poros Jurnal ilmiah Teknik Mesin Volume 8, No. 2 , April 2005,ISSN 1410 – 6841 Jurusan Teknik Mesin Fakultas Teknik Universitas Tarumanagara , 2005.
4. Raldi Artono Koestoer, Nandy Putra, Iwan Setyawan, Perpindahan kalor konveksi paksa dari nanofluida pada pipa horizontal dengan fluks kalor konstan, Seminar nasional Tahunan Teknik Mesin III (SNTTM III), Universitas Hasanuddin, Makassar 6-7 Desember 2004, IISBN 979-97158-0-6
5. Raldi Artono Koestoer, Hari Fitrianto , Kinerja termostat analog bimetal pada pengendalian temperatur air dapa delta box dengan elemen peltier sebagai pompa kalor, Seminar nasional Tahunan Teknik Mesin III, Universitas Hasanuddin, Makassar 6-7 Desember 2004, ISBN 979-97158-0-6
6. Raldi Artono Koestoer, Ikhsan Betarempu, A. Indra Siswantara, Simulasi dan eksperimen pola aliran shallow water dengan halangan silinder pada sebuah model saluran terbuka, Seminar nasional Tahunan Teknik Mesin III (SNTTM III), Universitas Hasanuddin, Makassar 6-7 Desember 2004, ISBN 979-97158-0-6
7. Raldi Artono Koestoer, Using Teflon Coated to Improve Thermal Performance of a Vertical Condenser. 4th Fluid and Thermal Energy Conversion (FTEC 2003) – International Conference, USA., Sanur Bali – Indonesia, 7th –11th December 2003.
8. R.A. Koestoer, Proposed Model to Determine Thermal Boundary Layer in Laminair Flow in Tube Using Non-dimensional Number. ISTP-14 (International Symposium on Transport Phenomena), Under the auspice of The Pacific Center of Thermal Fluids Engineering (PCTFE), USA., Sanur Bali – Indonesia, 6th –9th July 2003.
9. R.A. Koestoer, Non Dimensional Parameter to Indicate the Fouling Factor in Heat Exchanger, the 13th International Symposium on Transport Phenomena, Victoria BC Canada. July 14th – 18th, 2002.
10. Raldi A. Koestoer, Walfajri, New Parameter to predict the Performance of Crude Distilling Unit Heat Exchanger, Regional Symposium on Chemical Engineering (RSCE), Bandung Indonesia, October 2001,
11. Raldi Artono Koestoer, Engkos A. Kosasih., Thermal Performance comparison Between Parallel and Counter Flow in water to air heat exchanger, Symposium of Thermal and Fluid, CSME Canada May 19th –22nd 1998.
12. Raldi Artono Koestoer & Nandy S, Turbin Sizing and Boiler consumption in Cogen System using Thermodynamic analysis an energy conservation alternative, Journal PII vol 4 no.4 1997 issn 0216-290.
13. Raldi Artono Koestoer & Engkos A. Kosasih, Heat Transfer Coefficient in film and drop-wise Condensation on Vertical Condenser, Fluid and Thermal Energy Conference (FTEC) Conference 1997 Yogyakarta.
14. Raldi Artono Koestoer, Heat Transfer Correlation for Combination R11, R123 and Water in Nucleate Pool Boiling Region With Cooper Heater, FTEC 1997 Yogyakarta.
15. Raldi Artono Koestoer & Irsan Taslimi, The Effect of Condensation Number to Vertical Copper Cylinder, CAFEO 1997 Thailand Proceeding.
16. Raldi A. Koestoer, Aropa Edison, Engkos A. Kosasih, The Finite Difference Method for Forced Convection Heat Transfer on Laminar Water Flow in Pipe, CAFEO 1997 Thailand Proceeding
17. Raldi Artono Koestoer, Numerical Finite Difference Method for laminar flow in tube, Seminar Metode Elemen Hingga ITB 1996.
18. Raldi Artono Koestoer, Determination of thermal Fully Developed Region of Flow in tube using Experimental Method, CAFEO 96 Malaysia Proceeding.
19. Raldi Artono Koestoer, Numerical FDM in force convection of laminar flow, Journal Teknologi Ed No 4 thn X December 1996.
20. Raldi Artono Koestoer, Nandy Setiadi, Visualization of Bubble Growth in Nucleate Pool Boiling of Water with Copper Heater, Regional Symposium On Chemical Engineering 1996.
21. Raldi Artono Koestoer, Nandy Setiadi, Thermodynamic Analysis of Cogeneration system from an Energy Conservation Perspective, TIEES 1996 Trabzon Turkey.
22. Ainul G, Wisnu, Rossy, R.A. Koestoer, Heat Transfer Characteristic and Boiling point Water Mixture and Radiator’s Coolant, 1996.
23. Raldi Artono Koestoer, Heat flux meter, National Science Seminar (the role of science and technology in industrial development, Institute of Technology Sepuluh Nopember (ITS), January 8, 1996, Surabaya.
24. Raldi Artono Koestoer, A. Rizali Gaffar , paper on DAAD seminar at Bandung, 1995.
25. International publication, Isothermal Curve of Temperature Distribution in Concentric Tube Exchanger, ASME Conference December 1995, Boston, USA.
26. Raldi Artono Koestoer, Imansyah, Turbine Sizing and Boiler Consumption, International Conference CAFEO 13, Bandung, Indonesia, October 11th , 1995.
27. Raldi Artono Koestoer, Numerical Heat Transfer Study for airflow in tube, Seminar on Technology and Nuclear Safety, Serpong, September 5th – 6th 1995.
28. D.A. Sumarsono, Raldi A. Koestoer, Pressure Wave Propagation in a Elastic Filled-Tube Subjected to a Shock Loading, International Conference on Fluid and Thermal Energy Conference’94, Bali, December 12th – 15th,1994
29. Raldi Artono Koestoer, R.Novirsal, Y. Sadewo, Techno Economical Design and Analysis of Cogeneration System by Steam Back Pressure Turbine, International Conference of Fluid and Thermal Energy Conference ’94, Bali, December 12th – 15th, 1994
30. Luthan JJ , RA Koestoer, Comparison of Boiling Two-Phase Flow Data with Two Fluid Model, International Conference of Fluid and Thermal Energy Conference’94, Bali, December 12th –15th, 1994
31. Rinaldy D, R. A. Koestoer, A Technique to evaluate capacity benefit from demand side management option, 12th conference of ASEAN Federation of Engineering Organization, 28th – 30th November 1994, Brunei Darussalam.
32. Raldi Artono Koestoer, Ahmad Rizali, A Model of Long Term Research Cooperation Between A State Owned Company (SOC) and a University an Experience of the University of Indonesia, Chemical Engineering Regional Symposium Sponsored by Japan Society for the Promotion of Science (JSPS) and Industrial Technology Development Institute-Philippines, Manila 24th – 26th October 1994.
33. Raldi Artono Koestoer, Changing of microstructure and its influence to thermal conductivity. A Research Report. 1994.
34. Rinaldy D., I I Hakim, Raldi Artono Koestoer., An Analysis of Primary Energy Consume for Power System Planning Using “Zuhal Optimisation Planning” (ZOPPLAN), International Conference CAFEO 11, Singapore, November 19th, 1993.
35. Raldi Artono Koestoer, Heat Transfer in Nucleate Pool Boiling Region with experimental Combination R11, R123 Versus Copper. 1993.
36. Raldi Artono Koestoer, Rusdi Malin, Thermal conductivity of the local building material; comparison to the ASHRAE standard, Seminar Analysis and Applied Heat & Mass transfer toward the industrialization era, Inter University Center in Engineering Science, University of Gadjah Mada, February 25th – 26th, 1992, Yogyakarta.
37. Raldi Artono Koestoer, Y. Alfadli, Relation between Emisivity and Conductivity of Metal in the range of 125-425ºC, Applied Heat and Mass Transfer, IUC, University of Gadjah Mada, February 25th – 26th, 1992, Yogyakarta.
38. Raldi Artono Koestoer, E. Kosasih, Determination of air temperature distribution with Finite Difference Method, Analysis and Applied Heat and Mass Transfer, IUC, University of Gadjah Mada, February 25th – 26th, 1992, Yogyakarta.
39. Raldi Artono Koestoer, Rusdi Malin, Thermal Conductivity of the Local Building Material, Seminar on Heat and Mass Transfer, IUC, University of Gadjah Mada, Yogyakarta, December 18th – 19th, 1990.
40. Raldi Artono Koestoer, Thermal Boundary layer on the annular space of the tube annulus, Research Report, International Research Grant from Toray science foundation Japan, September 19th, 1989.
41. Raldi Artono Koestoer, Budihardjo & Hadi Tresna Wibowo, Research experimental to improve the efficiency and performance of cooling tower using automatic data acquisition, Seminar in Institute for Research, University of Indonesia, August 9th, 1989, Jakarta.
42. Raldi Artono Koestoer, Using Finite Element Method to predict the temperature distribution on aircraft nacelle, PIRUSA’89 Conference, Computer Science Centre University of Indonesia, June 5th – 8th, 1989, Jakarta.
43. Raldi Artono Koestoer, Temperature distribution in water to air heat exchanger, Analysis and Applied Thermodynamic Seminar, Inter University Center in Engineering Science, Bandung Institute of Technology, February 8th, 1989, Bandung.
44. Raldi Artono Koestoer, Computer Programming needs some expertise, Newspaper SUARA PEMBARUAN, Desember 26th, 1988, Jakarta.
45. Raldi Artono Koestoer, M. Dachyar, Heat & Mass Transfer Seminar, IUC, University of Gadjah Mada, October 19th, 1988, Yogyakarta.
46. Raldi Artono Koestoer, Convection in two phase flow, heat Transfer Seminar, IUC-Engineering Science, University of Gadjah Mada, February 1987, Yogyakarta.
47. Raldi Artono Koestoer, Zulkifli, Visualisation of Flame stability with 2D water Table Modeling, Heat Transfer and Fluid Flow Seminar, ISBN : 979-8427-03-3.
48. Raldi Artono Koestoer, Wal Fajri, Determination of A Non Dimensional Parameter As A Substitute of Fouling Factor in Heat Exchanger, Heat Transfer and Fluid Flow Seminar, ISBN: 979-8427-03-3.
49. Raldi Artono Koestoer, August Manurung, E.Kosasih, Characteristic of Thermal Conductivity of Solid, Liquid and Gaz, ISBN 979-8611-18-7.
50. Raldi Artono Koestoer, Sub cooled boiling heat transfer, National Science Congress IV, September 8th – 12th, 1986, Indonesia Institute of Science (LIPI), Jakarta.
51. Raldi Artono Koestoer, Zero Method heat flux sensor, Sensor & Actuator, Vol.7, 1985, elseviar sequoi.
52. Raldi Artono Koestoer, Capteur de flux thermique a methode de zero, Capteur 84 conference, Paris, J

Iklan

One response

  1. ———————————
    14. Speaker in 9th National Seminar on Industrial Engineering – Improvement of the relevancy of Higher Education on Technology and Human Resources Quality facing on 21st century, organized by Faculty of Industrial Engineering ITS (Surabaya Institute of Technology), Surabaya February 27th – 28th 1997
    ———————————

    Prof,

    Institut Teknologi Surabaya (Surabaya Institute of Technology) itu TIDAK ADA. Kalaupun yang dimaksud adalah ITS Surabaya, maka kepanjangan ITS adalah Institut Teknologi Sepuluh Nopember.

    Ref: http://katamata.wordpress.com/2008/06/02/its/

    salam,
    katamata

Leave a Reply (boleh kasi komentar)

Isikan data di bawah atau klik salah satu ikon untuk log in:

Logo WordPress.com

You are commenting using your WordPress.com account. Logout / Ubah )

Gambar Twitter

You are commenting using your Twitter account. Logout / Ubah )

Foto Facebook

You are commenting using your Facebook account. Logout / Ubah )

Foto Google+

You are commenting using your Google+ account. Logout / Ubah )

Connecting to %s